Self lubricating bearing FAG principle

Before each machinery industry by FAG bearing mostly ball, needle and the like, only a small part has a self-lubricating bearing FAG, believe that in the near future self lubricating bearing will be FAG adaptability, wear-resistant, economy beyond all dispute advantages and become FAG bearing industry leading products. The following is part of the FAG application of self lubricating bearing characteristics and advantages: no oil lubrication FAG bearing series
1, lubrication without oil or oil lubrication, it is applied to gas or difficult to refueling sites, can be in use without maintenance or less maintenance.
2, good wear resistance, small friction coefficient, long service life. 3, there is a moderate amount of elastoplastic stress, can be distributed in a wide contact surface, improve the bearing capacity of FAG.
In 4, the static and dynamic friction coefficient is similar, can eliminate the low speed creeping, so as to ensure the accuracy of machine operation.
5, low vibration, noise reduction, pollution prevention, improve labor conditions.
6, in the process of operation can form the transfer film, to protect the on axis grinding effect, no bite shaft phenomenon.
In 7, the grinding shaft hardness requirement is low, without tempering the shaft can be used, thereby reducing the processing difficulty.
8, thin-walled structure, light weight, can reduce the mechanical volume.
In 9, the back of steel can be a variety of plating metal, can be used in the corrosive medium; it has been widely used in various mechanical sliding parts, such as: printing machine, textile machine, tobacco machine, micro motor, automobile, motorcycles and agricultural machinery and so on.
Boundary lubrication self lubrication FAG bearing series introduction
The 1 bearing good, good wear resistance.
2 suitable for high low-speed rotary movement, rocking movement and often under load start-stop frequently and not susceptible to the formation of the hydrodynamic lubrication.
3 under the condition of boundary lubrication without oil can be long-term maintenance, and in the FAG layer gas bearings last longer.
4 surface plastic layer in forming can keep certain allowance assembly seat hole, pressure can be their own processing, in order to achieve a better fitting dimensions.
5 products are mainly applied in auto chassis, metallurgical machinery, mining machinery, hydraulic machinery, construction machinery, agricultural machinery, steel rolling equipment. JDB solid mosaic FAG bearing series JDB solid mosaic FAG bearing series is the universal base products, high pressure, low pressure, both high and low temperature, oil, lubrication without oil or water lubrication, can adapt. The base material is high strength brass, than the average copper hardness doubles, wear resistance increased one times above. Widely used in: light industry machinery, heavy machinery, construction machinery, metallurgical machinery, transport machinery, such as: continuous casting machine, rolling mill, injection molding machine, paper machine, mold-guided, ships, machine tools and so on.